Hioki 3532-50 - Continuous Test Function

116
_____________________________________________________________________________________________
4.22 Continuous Test Function
______________________________________________________________________________________________
Page Panel numbers
1
2
3
4
5
6
1- 5
6-10
11 - 15
16 - 20
21 - 25
26 - 30
4.22.1 Control Screen Sequence
Initial screen
Menu screen
Application menu screen
Save the test conditions
for continuous testing
Continuous testing screen
4.22 Continuous Test Function
It is possible to read in order test conditions which have been saved using
the panel save function, and to perform continuous testing.
Up to five panel numbers can be selected in a page for the continuous
testing.
After powering off on the Continuous test screen, the same screen is
displayed when the power is turned on again.
Section 4.17, "Panel Save Function"
Press the key.
Press the key.
Press the key.
Select the panel number which you wish to test.
Press the key to start test.