Hioki 3532-50 - Details of the Setting Process

75
_____________________________________________________________________________________________
4.11 Setting the Trigger Delay
______________________________________________________________________________________________
4.11.2 Details of the Setting Process
Initial screen
Menu screen
The digit keys (If held down continuously, the corresponding digit increments
or decrements continuously.) (If the limit for the corresponding digit is reached,
these keys change to non-reversed video and become inactive.)
Press this key when
setting is completed to
return to the Initial screen.
1. Press the key on the Initial screen.
The Menu screen will be displayed.
2. Press the key on the Menu screen.
The Trigger delay setting screen will be displayed.
3. Set the desired value for the delay time period using the digit keys.
The range over which the delay time period can be set :
10 ms to
9.99
s, with a resolution of 10 ms
The other keys, which cannot be used, are shown in non-reversed video.
4. When the setting has been established as above, press the key to return
to the Initial screen.