118
_____________________________________________________________________________________________
4.22 Continuous Test Function
______________________________________________________________________________________________
Continuous Test Screen
NOTE
NOTE
5. Using the and keys
,
make a display of panel numbers which are
previously saved.
The panel numbers which are not saved or which are invalid even if saved
(when the both first and third parameters are off) are not displayed.
6. Set whether testing of each panel number is executed or not.
When the saving conditions of the panel or previous test result is displayed,
the testing is executed. However, when "
***
NO USE
***
" is displayed, the
testing is not executed. In this example, make a setting not to test for the
panel number 7.
When changing a page, the all panel number displayed will be tested.
To Next Page
Loading...
