Hioki 3532-50 - Page 23

9
_____________________________________________________________________________________________
2.2 Connecting the Test Leads
______________________________________________________________________________________________
1
2
3
4
5
6
7
8
9
10
11
12
13
14
A
NOTE
Test fixture
 The connections to the article to be tested are as shown in the following
figure.
 No test cables are included with the 3532-50 unit. They must be
purchased separately. (For details, refer to Section 7.4, "Options")
 If all four terminals are left floating, the numbers which appear on the
display are completely meaningless.