Hioki 3532-50 - Page 76

62
_____________________________________________________________________________________________
4.8 Short Circuit Compensation
______________________________________________________________________________________________
A
LL ke
y
Press this key to interrupt setting
and return to the Initial screen.
OFF ke
y
SPOT ke
y
3. On the Initial screen, press the key, and the Menu screen will be
displayed.
4. Press the
key on the Menu screen, and the Short circuit compensation
screen will be displayed.
5. The SHORT circuit compensation method can be set to:
:
Compensation values are obtained for all test frequencies .
:
Compensation values are obtained at the set test frequency only.
:
The short circuit compensation data are cleared.