Hioki DT4261 - Page 102

96
Wireless Communications Function
Conrming the HID setting
OFF
22
11
1
Remove the test leads from the
instrument.
2
Set the rotary switch to OFF.
3
Install the Z3210 Wireless Adapter (option) to the
instrument.
See: “Z3210 Wireless Adapter installation procedure” (p. 42)
4
Check the HID setting.
With the power o󰀨, turn the rotary switch while
holding down the RANGE key.
Ω
(Fifth position from OFF)
The setting saved in the Z3210 is displayed.
When [−−−−] is displayed
Update the Z3210 to the latest version using
GENNECT Cross (version 1.8 or later).
or
See the procedure on the next page when changing the HID setting.
HIOKI DT4261A961-00