36
Use of Test Leads
CAUTION
Do not step on cords or allow them to caught
between other objects.
Doing so may damage insulation, resulting in electric
shock.
Do not touch the tips of test leads.
The tips of test leads are sharp and could injure the
user.
Do not bend or pull on cables at temperatures
of 0°C or lower.
Since cables become rigid, doing so could damage the
insulation or cause a wire break, resulting in electric
shock.
L9300 Test Lead (accessory)
See the precautions in “2.3 Use of Test Leads” (p. 35) as well.
WARNING
Use the test leads with the correct
measurement category displayed.
Do not use the test leads if the metal pin
is bent or the protective nger guard does
not slide properly.
Doing so could cause short circuit accidents.
To Next Page
Loading...
