Hioki DT4261 - Excel Direct Input Function (HID Function)

95
Wireless Communications Function
Excel
®
direct input function (HID function)
The HID function and GENNECT Cross cannot be used
simultaneously.
Human Interface Device Prole (HID), with which the Z3210
Wireless Adapter is equipped, is a prole same as that wireless
keyboard use.
HID ON Preparatory to data entry, open an Excel
®
le on your
mobile device or computer and choose a cell. When
the instrument’s display freezes, the measured values
will be entered on the cells. The use of this function
with the AUTP HOLD function enabled comes in
handy. (p. 76)
HID OFF When you wish to use GENNECT Cross, disable the
HID function.
The setting whether the HID function has been enabled or disabled
will not be saved in the instrument but in the Z3210.
Measured values can be entered.
Continued to the next page →
HIOKI DT4261A961-00