128
Repairs, Calibration, and Cleaning
When exposed to water during storage
Perform the following drain procedure to remove water drops.
DANGER
Remove water drops when the instrument
is exposed to water during storage, and
completely dry the instrument before use.
There is a risk of electric shock if the instrument is
used wet.
Drain
holes
Bottom
1
Securely hold the instrument
with the drain holes away from
you and shake it approximately
20 times until no water drops
are coming out.
Check the safety of the surroundings
and securely hold and shake the
instrument.
2
Securely hold the instrument
with the measurement terminal
facing down and gently tap the
instrument against a soft cloth,
etc. approximately 10 times until
no water drops are coming out.
Turn the rotary switch to switch the
shutter and drain water from all the 3
measurement terminals.
To Next Page
Loading...
