135
Error and Operation Display
6.3 Error and Operation Display
Display Description Solution
Err 001 ROM error (program) Repair is necessary. Please
contact your authorized Hioki
distributor or reseller.
Err 002 ROM error (adjustment data)
Err 004 Memory error (hardware
malfunction)
Err 005 ADC error (hardware
malfunction)
Err 008 Z3210 communication error
(connection failure, Z3210 or
hardware malfunction)
Perform the following
procedure. (p. 42)
• Insert the Z3210 again.
• Replace the Z3210 if you
have another one.
If the error still appears on
the display, it is necessary to
repair the instrument. Please
contact your authorized Hioki
distributor or reseller.
v.UP Instrument upgrade in process Do not remove the batteries
until the upgrade is complete.
To Next Page
Loading...
