Hioki DT4261 - Other Specifications

126
Other Specications
5.3 Other Specications
Interface specications
Connector for DT4900-01 Communication Package (USB)
After the instrument receives the command from the PC, the symbol
lights up and communication begins.
After the instrument receives the command from the PC, a response
operation is performed.
Communication
method
Infrared asynchronous serial communication (half-
duplex)
Communication
contents
• Response with measurement data
• The key operation function can be set on the PC.
Connector for Z3210 Wireless Adapter
Set the wireless communications function to ON (pressing for
1 second or more switches the ON/OFF setting) and start communication.
• Wireless communications function OFF: LCD
symbol o󰀨
• Wireless communications function ON: LCD
symbol lights up
• Wireless communications in process: LCD
symbol blinks
When the power is turned on after the Z3210 is installed, the wireless
communications function is automatically set to ON.
Communication
distance
10 m (line of sight distance)
HID function Switch the ON/OFF setting of the HID function of the
Z3210 in the power-on option.
When the HID function is ON, communication with
GENNECT Cross cannot be performed.
Upgrade function Using GENNECT Cross, update the instrument
rmware version.
Compatible instrument rmware: Version 1.00 or later
GENNECT Cross: Version 1.8 or later
When the wireless communications function is ON, communication using the
DT4900-01 cannot be performed.
HIOKI DT4261A961-00