82
Maximum, Minimum, Average, and Peak Values
4.4 Maximum, Minimum, Average, and
Peak Values
Displaying MAX, MIN, AVG, PEAK MAX, and PEAK
MIN in order
The maximum value (MAX), minimum value (MIN), average value
(AVG), maximum value of the peak value (PEAK MAX), minimum
value of the peak value (PEAK MIN) of the measured values can be
checked. (Default setting: OFF)
• The display of the maximum, minimum, average, and peak values is
disabled in the following functions.
AUTO V, LoZ V, AUTO A, continuity check, and diode test
• When using auto range, the measurement range is xed at the current setting.
• [APS] disappears and the auto power save function is disabled.
• When using the 6.000 V or lower range or the lter function enabled, the
display will not switch to [PEAK MAX] or [PEAK MIN].
1
Connect the test leads to the object to be measured.
2
Press
Each time the key is pressed, the main display is changed.
The current measured value can be checked in the sub display.
[MAX] [MIN] [AVG]
[PEAK MAX][PEAK MIN]
1 s
When changing back to the normal display
Press for at least 1 second.
To Next Page
Loading...
