92
Wireless Communications Function
4.10 Wireless Communications Function
The Z3210 Wireless Adapter (option) is required. GENNECT Cross
and the HID function (p. 95) cannot be used simultaneously.
Using GENNECT Cross
Using GENNECT Cross allows you to check and record the
measured data of the instrument, and create measurement reports
using your mobile device. It provides various functionality, including
harmonic measurement. For details, see the Help function of the
GENNECT Cross (application software, free of charge).
GENNECT Cross special site
https://gennect.net/en/cross/index
• The communication distance is approximately 10 m with a clear
line of sight. The communication distance may vary greatly
depending on the presence of an obstruction (wall or metallic
shielding object) and the distance between the oor (ground) and
instrument. To ensure the stable communication, make sure that
the radio wave intensity is sucient.
• GENNECT Cross is free of charge. However, the customer is
responsible for the cost to download the application software and
connect to the Internet when using the software.
• GENNECT Cross may not operate properly depending on the
mobile device.
• The Z3210 uses the 2.4 GHz band wireless technology.
When there is a device that uses the same frequency band such
as a wireless LAN (IEEE 802.11.b/g/n) near your mobile device,
the communication may not be established.
When the instrument is placed on the oor or ground, the
communication distance becomes shorter. It is recommended that
you move the instrument from the oor or ground and place it on a
desk or table or hold it by hand.
To Next Page
Loading...
