93
Wireless Communications Function
Using the wireless communications function
1
Install the Z3210 Wireless Adapter (option) to the
instrument (p. 41).
2
Install GENNECT Cross on your mobile device.
3
Turn on the instrument, and then enable the wireless
communications function.
When the power is turned on for the rst time after the Z3210 is installed,
the wireless communications function is automatically set to ON.
OFF
(Default
setting)
Press for at
least 1 second.
symbol lights up
(Wireless communications
function ON)
1 s
O: Wireless communications
function OFF
Blinking: Wireless
communications in process
4
Start GENNECT Cross and connect and register the
instrument.
Tap [Other]. Tap [Instrument
Settings].
Select the instrument to
connect.
Continued to the next page →
To Next Page
Loading...
