89
Communication with the PC
4.9 Communication with the PC
Using the DT4900-01 Communication Package (option), it is
possible to transmit data to the PC or to control the instrument.
Installing the special software on the PC
(See the Instruction Manual which accompanies with the
communication package.)
Attaching the communication adapter to the instrument (p. 90)
Connecting to the computer
The virtual COM ports of the PC are used as the USB interface. The
virtual COM ports that can recognize the instrument are COM1 to
COM256.
Communication method
Infrared asynchronous serial communication
(half-duplex)
Communication content
• Response with measurement data
• The key operation function can be set on the
PC.
Transmission speed 9600 bps
Data length 8 bits
Stop bit 1
Parity bit No
Delimiter CR+LF
To Next Page
Loading...
