98
Wireless Communications Function
IMPORTANT
To switch over from the HID function to GENNECT Cross
If you start GENNECT Cross without canceling the paring between the
mobile device and the instrument, GENNECT Cross may not be able to
recognize the instrument as a connectible device. Follow the procedure
below to reconnect the instrument to GENNECT Cross.
1. Use the Bluetooth
®
setting of your mobile device to delete the
instrument.
2. Disable the Z3210’s HID function. (p. 97)
3. Use the Instrument Settings of GENNECT Cross to reconnect the
instrument.
For details, please visit the Z3210’s website.
https://z3210.gennect.net
To Next Page
Loading...
