Hioki DT4261 - Page 109

103
Power-On Option Table
Description Procedure/Display
Setting
saved
User setting
retention function
enabled/disabled
With power o󰀨
(Any position)
The most recently used values for the
following settings are recorded for each
rotary switch position.
• Measurement items
• Range setting
• Filter setting
Yes
MAX, MIN
simultaneous
display function
enabled/disabled
(See: p. 83)
With power o󰀨
(Any position)
Yes
ON/OFF of the HID
function
(Only when the
Z3210 is installed)
(
See: p. 97)
With power o󰀨
(Any position)
–*
*: The ON/OFF setting of HID is saved in the Z3210.
HIOKI DT4261A961-00