16
Precautions for Use
Precautions during measurement
DANGER
Do not short-circuit the two measurement
lines with the metal portion of the test lead
tips or cables.
Doing so can cause arc ash, resulting in serious bodily
injury or damage to the instrument or other equipment.
Never touch the metal portion of the test
lead tips or cables during measurement.
Doing so could cause serious bodily injury or a short-
circuit.
Do not touch any input terminals on the VT
(PT), CT or the instrument when they are in
operation.
Doing so could cause serious bodily injury.
Do not input voltage to the resistance
measurement input terminal or the
resistance measurement, continuity check,
diode test, or capacitor function.
Doing so could damage the instrument, resulting in
bodily injury.
To Next Page
Loading...
