Hioki DT4261 - Page 27

21
Part Names and Functions
Press
Press for at least
1 second.
Power-on option
(p. 99)
11
Species/switches
the display of
the maximum,
minimum, average,
and peak values.
Cancels the display
of the maximum,
minimum, average,
and peak values.
Enables/disables
the DC voltage
positive/negative
judgment function.
22
0 ADJ
Species/switches/
cancels the
passband of the low
pass lter.
Zero adjustment Buzzer sound
ON/OFF
33
AUTO RANGE
Sets the range to
manual/switches
the range, and sets
to the clamp current
range.
Sets the range to
auto.
• Displays all LCD
segments.
• Displays the
software version.
• Displays the
model number.
• Displays the
serial number.
• Checks the HID
settings. (Only
when the Z3210
is installed)
44
Turns on/o󰀨 the
display backlight.
Species/cancels
the wireless
communications
function. (Only
when the Z3210 is
installed)
Enables/disables
the automatic
deactivation
function of the
display backlight.
55
AUTO HOLD
Species/cancels
the hold function.
Species/cancels
the auto holding
function.
Disables the auto
power save function
(APS).
66
Switches the
measurement
items.
– Enables/disables
the user settings
retention function.
HIOKI DT4261A961-00