Hioki DT4261 - Page 4

ii
Contents
3.2 Voltage Measurement ...................................58
Measuring DC voltage, AC voltage, and
DC/AC composite voltage .........................................59
Measuring AC voltage ............................................... 60
Measuring voltage with low input impedance ...........61
3.3 Frequency Measurement .............................. 62
3.4 Continuity Check ...........................................63
3.5 Diode Voltage Measurement ........................64
3.6 Resistance Measurement .............................65
3.7 Electrostatic Capacity Measurement ..........66
3.8 Current Measurement ...................................68
Measuring AC current ............................................... 69
Measuring DC current/AC current ............................70
3.9 Measurement with Clamp On Probe
(AC Current) ...................................................71
4 Convenient Usage 73
4.1 Measurement Range Selection ....................73
Measuring with the auto range .................................73
Measuring with the manual range .............................74
4.2 Hold Function (HOLD) ..................................75
Retaining the measured value manually (HOLD) .....75
Retaining the measured value automatically
(AUTO HOLD)...........................................................76
4.3 Filter Function (FILTER) ................................79
4.4 Maximum, Minimum, Average, and
Peak Values ...................................................82
Displaying MAX, MIN, AVG, PEAK MAX, and
PEAK MIN in order ...................................................82
Displaying “MAX and MIN” or “PEAK MAX and
PEAK MIN” simultaneously .......................................83
4.5 Zero Adjustment ............................................ 84
HIOKI DT4261A961-00