Network Security
[ Network Security > RADIUS > Global ]
121
RM GUI GRS
Release
8.0
09/2019
4.4.1 RADIUS Global
[ Network Security > RADIUS > Global ]
This dialog lets you specify basic settings for RADIUS.
RADIUS configuration
Retransmits (max.)
Specifies how many times the device retransmits an unanswered request to the authentication
server before the device sends the request to an alternative authentication server.
Possible values:
1..15
(default setting:
4
)
Timeout [s]
Specifies how many seconds the device waits for a response after a request to an authentication
server before it retransmits the request.
Possible values:
1..30
(default setting:
5
)
Accounting
Activates/deactivates the accounting.
Possible values:
marked
Accounting is active.
The device sends the traffic data to an accounting server specified in the
Network Security >
RADIUS
> Accounting Server
dialog.
unmarked
(default setting)
Accounting is inactive.
NAS IP address (attribute 4)
Specifies the IP address that the device transfers to the authentication server as attribute 4. Specify
the IP address of the device or another available address.
Possible values:
Valid IPv4 address (default setting:
0.0.0.0
)
In many cases, there is a firewall between the device and the authentication server. In the Network
Address Translation (NAT) in the firewall changes the original IP address, and the authentication
server receives the translated IP address of the device.
The device transfers the IP address in this field unchanged across the Network Address Translation
(NAT).
To Next Page
Loading...
