Diagnostics
[ Diagnostics > System > ARP ]
263
RM GUI GRS
Release
8.0
09/2019
6.2.5 ARP
[ Diagnostics > System > ARP ]
This dialog displays the MAC and IP addresses of the neighboring devices connected to the device
management.
Table
Port
Displays the port number.
IP address
Displays the IP address of a device that responded to an ARP query to this device.
MAC address
Displays the MAC address of a device that responded to an ARP query to this device.
Last updated
Displays the time in seconds since the current settings of the entry were registered in the ARP
table.
Type
Displays the type of the ARP entry.
Possible values:
static
Static ARP entry. When the ARP table is deleted, the device keeps the ARP entry.
dynamic
Dynamic ARP entry. When the
Aging time [s]
has been exceeded and the device does not receive
any data from this device during this time, the device deletes the ARP entry.
local
IP and MAC address of the device management.
Active
Displays that the ARP table contains the IP/MAC address assignment as an active entry.
Buttons
You find the description of the standard buttons in section “Buttons” on page 13.
Reset ARP table
Removes the dynamically set up addresses from the ARP table.
To Next Page
Loading...
