User interfaces
1.2
Command Line Interface
35
UM Config GRS
Release
8.0
09/2019
Possible commands/parameters
You can obtain a list of the commands or the possible parameters by entering
help
or
?
, for example
by entering
(GRS) >show ?
When you enter the command displayed, you get a list of the parameters available for the command
show
.
When you enter the command without space character in front of the question mark, the device
displays the help text for the command itself:
!*#(GRS)(Config)#show?
show Display device options and settings.
1.2.13 Use cases
Saving the Configuration
To help ensure that your password settings and your other configuration changes are kept after the
device is reset or after an interruption of the voltage supply, you save the configuration. To save
your current configuration, you proceed as follows:
Enter
enable
to switch to the Privileged Exec mode.
Enter the following command:
save [profile]
Execute the command by pressing the <Enter> key.
To Next Page
Loading...
