Hirschmann GREYHOUND GRS1020 - Managing Authentication Lists

Access to the device
3.1
Authentication lists
56
UM Config GRS
Release
8.0 09/2019
3.1.3 Managing authentication lists
You manage the authentication lists in the Graphical User Interface or in the Command Line
Interface.
Perform the following steps:
 Deactivate the authentication list for those applications by means of which no access to the
device is performed, for example 8021x .
 Open the Device Security > Authentication List dialog.
The dialog displays the authentication lists that are set up.
show authlists
Displays the authentication lists that are set up.
 In the Active column of the authentication list defaultDot1x8021AuthList , unmark the
checkbox.
 To save the changes temporarily, click the button.
authlists disable
defaultDot1x8021AuthList
Deactivates the authentication list
defaultDot1x8021AuthList .