Configuring the ports
6.1
Enabling/disabling the port
86
UM Config GRS
Release
8.0
09/2019
6 Configuring the ports
The following port configuration functions are available.
Enabling/disabling the port
Selecting the operating mode
6.1 Enabling/disabling the port
In the default setting, every port is enabled. For a higher level of access security, disable
unconnected ports.
Perform the following steps:
Open the
Basic Settings > Port
dialog,
Configuration
tab.
To enable a port, mark the checkbox in the
Port on
column.
To disable a port, unmark the checkbox in the
Port on
column.
To save the changes temporarily, click the button.
enable
Change to the Privileged EXEC mode.
configure
Change to the Configuration mode.
interface 1/1
Change to the interface configuration mode of
interface
1/1
.
no shutdown
Enable the interface.
To Next Page
Loading...
