Hirschmann GREYHOUND GRS1020 - Adjusting the Session Timeouts

To Next Page

To Previous Page

Assistance in the protection from unauthorized access

7.7

Adjusting the session timeouts

UM Config GRS

Release

8.0

09/2019

7.7 Adjusting the session timeouts

The device lets you automatically terminate the session upon inactivity of the logged-on user. The

session timeout is the period of inactivity after the last user action.

You can specify a session timeout for the following applications:

 Command Line Interface sessions using an SSH connection

 Command Line Interface sessions using a Telnet connection

 Command Line Interface sessions using a serial connection

 Graphical User Interface

Timeout for Command Line Interface sessions using a SSH connection

Perform the following steps:

Timeout for Command Line Interface sessions using a Telnet connection

Perform the following steps:

 Open the

Device Security > Management Access > Server

dialog,

SSH

tab.

 Specify the timeout period in minutes in the

Configuration

frame,

Session timeout [min]

field.

 To save the changes temporarily, click the button.

enable

Change to the Privileged EXEC mode.

configure

Change to the Configuration mode.

ssh timeout <0..160>

Specify the timeout period in minutes for Command

Line Interface sessions using an SSH connection.