Diagnostics
[ Diagnostics > Syslog ]
266
RM GUI GRS
Release
8.0
09/2019
6.3 Syslog
[ Diagnostics > Syslog ]
The device lets you report selected events, independent of the severity of the event, to different
syslog servers. In this dialog, you specify the settings for this function and manage up to 8 syslog
servers.
Operation
Operation
Enables/disables the sending of events to the syslog servers.
Possible values:
On
The sending of events is enabled.
The device sends the events specified in the table to the specified syslog servers.
Off
(default setting)
The sending of events is disabled.
Table
Index
Displays the index number to which the table entry relates.
When you delete a table entry, this leaves a gap in the numbering. When you create a new table
entry, the device fills the first gap.
Possible values:
1..8
IP address
Specifies the IP address of the syslog server.
Possible values:
Valid IPv4 address (default setting:
0.0.0.0
)
Destination UDP port
Specifies the UDP port on which the syslog server expects the log entries.
Possible values:
1..65535
(default setting:
514
)
Transport type
Displays the transport type the device uses to send the events to the syslog server.
To Next Page
Loading...
