Time
[ Time > Basic Settings ]
55
RM GUI GRS
Release
8.0
09/2019
Possible values:
local
System clock of the device.
sntp
The
SNTP
client is activated and the device is synchronized by an
SNTP
server.
Local offset [min]
Specifies the difference between the local time and
System time (UTC)
in minutes:
Local offset [min]
=
System time
−
System time (UTC)
Possible values:
-780..840
(default setting:
60
)
Buttons
You find the description of the standard buttons in section “Buttons” on page 13.
[Daylight saving time]
In this tab, you activate the automatic daylight saving time function. You specify the beginning and
the end of summertime using a pre-defined profile, or you specify these settings individually. During
summertime, the device puts the local time forward by 1 hour.
Operation
Daylight saving time
Enables/disables the
Daylight saving time
mode.
Possible values:
On
The
Daylight saving time
mode is enabled.
The device automatically changes between summertime and wintertime.
Off
(default setting)
The
Daylight saving time
mode is disabled.
The times at which the device changes between summertime and wintertime are specified in the
Summertime begin
and
Summertime end
frames.
Profile...
Displays the
Profile...
dialog. There you select a pre-defined profile for the beginning and the end of
summertime. This profile overwrites the settings in the
Summertime begin
and
Summertime end
frames.
To Next Page
Loading...
