Switching
[ Switching > IGMP Snooping > Configuration ]
160
RM GUI GRS
Release
8.0
09/2019
Possible values:
marked
The
Static query port
mode is active.
The port is a static query port in the VLANs that are set up.
unmarked
(default setting)
The
Static query port
mode is inactive.
The port is not a static query port. The device transmits IGMP report messages to the port only
if it receives IGMP queries.
VLAN IDs
Displays the ID of the VLANs to which the table entry applies.
Buttons
You find the description of the standard buttons in section “Buttons” on page 13.
To Next Page
Loading...
