Switching
[ Switching > VLAN > Port ]
195
RM GUI GRS
Release
8.0
09/2019
Possible values:
marked
The ingress filtering is active.
The device compares the VLAN ID in the data packet with the VLANs of which the device is a
member. See the
Switching > VLAN > Configuration
dialog. If the VLAN ID in the data packet
matches one of these VLANs, then the port transmits the data packet. Otherwise, the device
discards the data packet.
unmarked
(default setting)
The ingress filtering is inactive.
The device transmits received data packets without comparing the VLAN ID. Thus the port also
transmits data packets with a VLAN ID of which the port is not a member.
Buttons
You find the description of the standard buttons in section “Buttons” on page 13.
To Next Page
Loading...
