Hirschmann GREYHOUND GRS1020 - Page 418

Managing configuration profiles
4.3
Loading settings
78
UM Config GRS
Release
8.0 09/2019
To import the configuration profile from the external memory, perform the following steps:
 In the Import profile from external memory frame, Profile name drop-down list, select the name
of the configuration profile to be imported.
The prerequisite is that the external memory contains an exported configuration profile.
 In the Destination frame, specify where the device saves the imported configuration profile:
 In the Profile name field, specify the name under which the device saves the
configuration profile.
 Click the Ok button.
The device copies the configuration profile into the non-volatile memory ( NVM ) of the device.
If you specified the value ram in the Destination frame, then the device disconnects the
Graphical User Interface and uses the settings immediately.
enable
Change to the Privileged EXEC mode.
copy config remote ftp://
<IP_address>:<port>/<path>/<file_name>
running-config
Import and activate the settings of a configuration
profile saved on an FTP server.
The device copies the settings into the volatile
memory and disconnects the connection to the
Command Line Interface. The device immediately
uses the settings of the imported configuration
profile.
copy config remote tftp://
<IP_address>/ <path>/<file_name>
running-config
Import and activate the settings of a configuration
profile saved on a TFTP server.
The device copies the settings into the volatile
memory and disconnects the connection to the
Command Line Interface. The device immediately
uses the settings of the imported configuration
profile.
copy config remote sftp://
<user name>:<password>@<IP_address>/
<path>/<file_name> running-config
Import and activate the settings of a configuration
profile saved on a SFTP server.
The device copies the settings into the volatile
memory and disconnects the connection to the
Command Line Interface. The device immediately
uses the settings of the imported configuration
profile.
copy config remote ftp://
<IP_address>:<port>/<path>/<file_name>
nvm profile config3
Import the settings of a configuration profile saved
on an FTP server and save the settings in the
configuration profile config3 in the non-volatile
memory ( nvm ).
copy config remote tftp://
<IP_address>/<path>/<file_name>
nvm profile config3
Import the settings of a configuration profile saved
on a TFTP server and save the settings in the
configuration profile config3 in the non-volatile
memory ( nvm ).