Time
[ Time > SNTP > Client ]
60
RM GUI GRS
Release
8.0
09/2019
Possible values:
128..2048
(default setting:
320
)
Disable client after successful sync
Activates/deactivates the disabling of the
SNTP
client after the device has successfully
synchronized the time.
Possible values:
marked
The disabling of the
SNTP
client is active.
The device deactivates the
SNTP
client after successful time synchronization.
unmarked
(default setting)
The disabling of the
SNTP
client is inactive.
The
SNTP
client remains active after successful time synchronization.
State
State
Displays the status of the
SNTP
client.
Possible values:
disabled
The
SNTP
client is disabled.
notSynchronized
The
SNTP
client is not synchronized with any
SNTP
or
NTP
server.
synchronizedToRemoteServer
The
SNTP
client is synchronized with an
SNTP
or
NTP
server.
Table
In the table you specify the settings for up to 4
SNTP
servers.
Index
Displays the index number to which the table entry relates.
Possible values:
1..4
The device automatically assigns this number.
When you delete a table entry, this leaves a gap in the numbering. When you create a new table
entry, the device fills the first gap.
To Next Page
Loading...
