Hirschmann GREYHOUND GRS1020 - Page 78

Device Security
[ Device Security > Management Access > Server ]
77
RM GUI GRS
Release
8.0 09/2019
Buttons
You find the description of the standard buttons in section “Buttons” on page 13.
[SNMP]
This tab lets you specify settings for the SNMP agent of the device and to enable/disable access
to the device with different SNMP versions.
The SNMP agent enables access to the device management with SNMP-based applications.
Configuration
SNMPv1
Activates/deactivates the access to the device with SNMP version 1.
Possible values:
 marked (default setting)
Access is activated.
 unmarked
Access is deactivated.
You specify the community names in the Device Security > Management Access > SNMPv1/v2
Community dialog.
SNMPv2
Activates/deactivates the access to the device with SNMP version 2.
Possible values:
 marked (default setting)
Access is activated.
 unmarked
Access is deactivated.
You specify the community names in the Device Security > Management Access > SNMPv1/v2
Community dialog.
SNMPv3
Activates/deactivates the access to the device with SNMP version 3.
Possible values:
 marked (default setting)
Access is activated.
 unmarked
Access is deactivated.
Network management systems like Industrial HiVision use this protocol to communicate with the
device.