Hitachi DKC910I - Page 100

Copyright © 2019, 2021, Hitachi, Ltd.
DKC910IHitachi Proprietary
[INST(IN)08-02-20]
Rev.1
INST(IN)08-02-20
Figure 8-8 Installing the Controller Board (DKC)
NOTE: The above illustrations are for VSP 5500 and VSP 5500H. For VSP 5100 and VSP
5100H, only CTL01 and CTL12 are installed.
Lever
Lever
DKC
Controller Board
Screws (blue)
Screws (blue)