Copyright © 2019, 2021, Hitachi, Ltd.
DKC910IHitachi Proprietary
[INST(IN)09-03-51]
(2) Connecting the LAN cables to the lower LAN ports on SSVP0 via the LAN cable kit.
(a) Connect the LAN cables between the LAN port (L0) on SSVP0 and the LAN board 1
(Management LAN port) on DKC-2. （When DKC-2/DKC-3 are not installed, this step is not
necessary.）
(b) Connect the LAN cables between the LAN port (L1) on SSVP0 and the LAN board 1
(Management LAN port) on DKC-3.（When DKC-2/DKC-3 are not installed, this step is not
necessary.)
(c) Connect the LAN cables between the LAN port (L2) on SSVP0 and the LAN board 1
(Management LAN port) on DKC-4.（When DKC-4/DKC-5 are not installed, this step is not
necessary.）
(d) Connect the LAN cables between the LAN port (L3) on SSVP0 and the LAN board 1
(Management LAN port) on DKC-5.（When DKC-4/DKC-5 are not installed, this step is not
necessary.）
When only DKC-0 and DKC-1 are installed, do not connect the connectors for the rear connection
on the LAN cable kit that is connected to the lower LAN ports on SSVP0 to anything.
Rev.2
INST(IN)09-03-51
To Next Page
Loading...
