Hitachi DS240 - Page 118

BIOS EXIT SCREEN
4-13
th
e user saved earlier, instead of being restored to the factory defaults. BIOS only
supports six USB boot devices.
Figure 4-8. Exit Screen
Table 10: Exit Screen Description
SETUP ITEM OPTIONS
DESCRIPTION
COMMENTS
Discard Changes and Exit
Exit system setup without saving any
changes.
Save Changes and Reset
Reset the system after saving the
changes.
Discard Changes
Discards changes done so far to any of
the setup options.
Restore Defaults
Restore/Load Default values for all the
setup options.
Save as User Defaults
Save the changes done so far as User
Defaults.
Restore User Defaults
Restore the User Defaults to all the setup
options.
[<Device String 1>]
Boot with Device
<Device String 1>.
[<Device String 2>]
Boot with Device
<Device String 2>.
[<Device String 3>]
Boot with Device
<Device String 3>.
[<Device String 4>]
Boot with Device
<Device String 4>.
[<Device String 5>]
Boot with Device
<Device String 5>.
[<Device String 6>]
Boot with Device
<Device String 6>.