BIOS EXIT SCREEN
4-12
Exit Screen
The Exit screen allows the user to choose to save or discard the configuration changes
made on the other screens. It also provides a method to restore the server to the factory
defaults or to save or restore a set of user defined default values. If Restore Defaults is
selected, the default settings, noted in bold in the tables in this chapter, will be applied. If
Restore User Default Values is selected, the system is restored to the default values that
Boot Option #1
[<Device String 1>]
[<Device String 2>]
…
[Disabled]
Sets the system boot order
Boot Option #2
[<Device String 1>]
[<Device String 2>]
…
[Disabled]
Sets the system boot order
Boot Option #3
[<Device String 1>]
[<Device String 2>]
…
[Disabled]
Sets the system boot order
Boot Option #4
[<Device String 1>]
[<Device String 2>]
…
[Disabled]
Sets the system boot order
USB Drive BBS
Priorities
Specifies the Boot Device Prior-
ity sequence from available
USB Drivers.
Only appears when at least
one USB is detected.
Network Drive
BBS Priorities
Specifies the Boot Device Prior-
ity sequence from available
NETWORK Drivers.
Only appears when at least
one NETWORK is detected.
Hard Disk Drive
BBS Priorities
Specifies the Boot Device Prior-
ity sequence from available
Hard Disk Drivers.
Only appears when at least
one Hard Disk is detected.
CD/DVD ROM
Drive BBS Prior-
ities
Specifies the Boot Device Prior-
ity sequence from available CD/
DVD ROM Drivers.
Only appears when at least
one CD/DVD is detected.
Table 9: Boot Options Screen Description (Continued)
SETUP ITEM OPTIONS
DESCRIPTION
COMMENTS
To Next Page
Loading...
