Hitachi DS240 - PCIe Expansion Card Installation

INSTALLING THE HARDWARE PCIE EXPANSION CARDS
2-14
2.6 PCIe Expansion Cards
PCIe Slots View
Figure 2-19. System Back View
Removing a PCIe Riser Assembly
Note:
Disconnecting the power cable of GPU card while the GPU cards are installed to PCIe Riser Assembly.
CAUTION!
ENSURE ALL POWER IS DISCONNECTED FROM THE SYSTEM BEFORE PROCEEDING.
!
Riser slot4 (x24) Riser slot1 (x24)Riser slot3 (x32)
OCP slot Riser Riser
slot1slot4
Riser
slot3
Riser
slot2
Latch
Plunger
Latch
Plunger
(HFHL x16+x16)(FHFL x16:GPU) (FHFL x16:GPU)
(FHHL x8+x16:General) (FHHL x8+x16:General)
Latch Plunger
Secured Open