INSTALLING THE HARDWARE REMOVING A PCIE RISER ASSEMBLY
2-15
Release the latch plungers on the mid-brace to open position while the GPU cards are installed to PCIe Riser
Assembly.
Figure 2-20. Releasing the latch plungers
To remove a riser assembly for the installation of a PCIe card, follow these guidelines:
1. Disconnect the power source and remove the system from the rack frame.
2. Remove the mainboard sled. See Removing a Mainboard Sled on page 2-11.
3. Locate the PCIe riser assembly in the back of the chassis.
4. Lossen the captive screw.
5. Pull the latch plunger to the open position.
To Next Page
Loading...
