Hitachi DS240 - Out-Of-Band (Offline) Update (Via BMC Webui)

BIOS FIRMWARE UPDATE INSTRUCTIONS
4-20
 Enter command “ubios_ip.bat <BMC IP> XXX.bin”
Out-of-band (Offline) update (via BMC WebUI)
 Make sure the the server is powered off and keep the AC
power source connected.
 Connect one end of network cable to the Server BMC NIC port and the other end
to the remote client or server.
 Log into BMC WEBUI via http protocol, enter 192.168.0.120 in IE (Internet
explorer)/chrome/firefox. (default: admin/cmb9.admin; 192.168.0.120 or check wit
your administrator for accessing)
 Select “Maintenance” > “BIOS Update” > “Choose” option