Hitachi DS240 - Mainboard Jumper Settings

CONNECTORS AND JUMPERS MAINBOARD
6-2
Jumpers
See the following figure for information on mainboard jumpers.
Figure 6-2. Mainboard Jumpers
SW1
SW3
SW1
SW1
BIT1: (Reserved)
BIT2: PASSWD CLEAR
Off (Open): Normal (Default)
On (Short): Password Clear
SW3
SW3
BIT1: CMOS CLEAR
Off (Open): Normal (Default)
On (Short): RTC Reset
BIT2: ME FW UPDATE
Off (Open): Normal (Default)
On (Short): ME Force Update
DIP Jumper Settings