INSTALLING THE HARDWARE INSTALLING A PCIE RISER ASSEMBLY
2-19
3. Remove the PCIe card from the riser assembly.
Figure 2-24. Removing a PCIe Card
4. Replace the PCIe card.
Installing a PCIe Card
1. Remove the PCIe riser assembly from the system. See Removing a PCIe Riser
Assembly on page 2-14.
2. If
a dust plate is attached to the riser bracket, remove it at this time. Rotate the latch
securing the dust plate to the riser bracket to the open position. Keep the dust
plate for future use.
3. Align the PCIe card with the PCIe slot in the riser board and install.
Note:
Check the PCIe Card size before installing to ensure compatibility.
Install the mount bracket to the GPU card as shown:
To Next Page
Loading...
