ABOUT THE SYSTEM TPM CONFIGURATION SETTINGS
1-22
Table 12: Configuration on Trusted Computing Screen Description
SETUP ITEM OPTIONS DESCRIPTION COMMENTS
TPM 2.0 Device
Found
Information only. Displays cur-
rent TPM Status.Vendor
Firmware Version
Active PCR banks
Information only. Displays cur-
rent active PCR banks.
Available PCR
banks
Information only. Displays cur-
rent available PCR banks.
SHA-1 PCR Bank
[Disabled]
[Enabled]
Enable or Disable SHA-1 PCR
Bank
Only appears when “Available
PCR banks” includes this type.
SHA256 PCR Bank
[Disabled]
[Enabled]
Enable or Disable SHA256 PCR
Bank
Only appears when “Available
PCR banks” includes this type.
Pending operation
[None]
[TPM Clear]
Schedule an Operation for the
Security Device. NOTE: Your
computer will reboot to change
the State of Security
Device.
Only appears when TPM device
exists
Physical Presence
Spec Version
[1.2] / [1.3]
Select to Tell
O.S. to support PPI
Spec Version 1.2 or 1.3. Note
some HCK tests might not
support 1.3.
PH Randomization
[Disabled]
[Enabled]
Enables or Disables Platform
Hierarchy randomization.
To Next Page
Loading...
