INSTALLING THE HARDWARE INSTALLING A 2.5” HDD INTO AN HDD TRAY
2-5
2. Install the HDD into the tray. Make sure the guide pins on the tray and the screw
holes on the HDD align. Adjust the HDD as necessary.
Figure 2-5. Installing a 2.5” HDD in a Tray
3. P
ush the side of the tray to the closed position and make sure all the guide pins on the
tray are invisible to secure the HDD to the tray.
Figure 2-6. Push the side of the tray to the fully clos
ed position
Guide Pin
Guide Pin
Guide Pin
Guide Pin
To Next Page
Loading...
