Hitachi VSP Gx00 series - Page 122

Attribute Description
Required /
Optional
Default
value
auth.server.name The name of an authentication
server.
When r
egistering a primary and
secondary server, use a comma to
separate the names. The name of
the server, including the primary
name, secondary name, and the
comma (1 byte) must be 64 bytes or
less.
The names can use all ASCII code
characters except for the following:
\ / : , ; * ? " < > | $ % & ' ˜
In this manual, the value specied
here is called server-name hereafter.
Required None
auth.group.mapping Information about whether to work
together with an authorization
server
■
true: Works together
■
false: Does not work together
Optional False
auth.radius.server-
name.protocol
RADIUS protocol to use.
■
PAP: Password authentication
protocol that transmits plaintext
user ID and password
■
CHAP: Challenge-handshake
authentication protocol that
transmits encrypted password
Required None
auth.radius.server-
name.host
A host name, an IPv4 address or an
IPv6 address of the RADIUS server.
An IPv6 address must be enclosed
in square brackets.
Required None
auth.radius.server-
name.port
A port number of the RADIUS
server.
Must be between 1 and 65,535.
1
Optional 1,812
auth.radius.server-
name.timeout
The number of seconds before the
connection to the RADIUS server
times out.
Must be between 1 and 30.
2
Optional 10
Creating a RADIUS conguration le
Chapter 4: User administration
System Administrator Guide for VSP Gx00 models and VSP Fx00 models 122