Procedure
1. Navigate to Home > SMU Administr
ator to display the Active Directory Servers
page.
2. Enter the Base Distinguished Name.
This name must be entered in LDAP distinguished name (DN) format which consists
of a sequence of "attribute=value" pairs separated by comma or semi-colon. The
Base Distinguished Name should contain the domain component (dc) attributes for
the organization's domain. So for the domain example.com it would be "dc=example,
dc=com". The name may also contain organization unit (ou) attributes.
The following table describes the î ´elds on this page:
Field/Item Description
Connection settings
Base Distinguished Name The LDAP root location for users and groups. The
name should only contain the domain components.
Connections
Connection Attempts The maximum number of times that the SMU
attempts to connect to each Active Dir
ectory server
when a connection fails.
Timeout for Connection
Attempts
The maximum time in seconds that the SMU waits
when connecting to an Active Directory server before
failing with a time out.
Conî ´guring Active Directory servers
Chapter 5: Setting up security
System Administrator Guide for VSP Gx00 models and VSP Fx00 models 163
To Next Page
Loading...
Need help?
General
