Hofmann MC10 HS - Operational Restrictions; Starting and Quitting the Program; Starting the Program; Quitting the Program

MC10 HS Basic Operation - Operational Restrictions
4 - 5
4.2 Operational Restrictions
INFORMATION
Some particular functions may be blocked for the cur-
rently selected access group (Operator, Supervisor).
The associated values and actions are greyed out.
 Refer to Chapter 5.6 - Access Privileges.
4.3 Starting and Quitting the Pro-
gram
4.3.1 Starting the Program
 Switch on the machine.
 Windows starts up.
 The MC program starts with the measuring
screen. The rotor selected prior to quitting the
program last time is active now.
4.3.2 Quitting the Program
 Main Menu \ Setup MC10 \ Quit MC10.
 The MC program and the Windows session are
terminated.