Basic Operation - Unbalance plotting MC10 HS
4 - 16
Measuring status
Indicator RH / LH rotation
1/min (RPM) Indicator Currently measured speed
1f
2f
Indicator direct speed
optional - double sample rate
for diagnosis
Current rotor Indication of currently selected
rotor type
Measuring status refer to table below
Manual / Automatic Manual or automatic mode.
Measuring / Measuring
complete / Stable
Display of measurement status.
In tolerance / Out of tole-
rance / Correction required
Assessment of measurement
result.
Speed error Speed out of tolerance.
To Next Page
Loading...