Hologic Fluoroscan Insight FD - Administrative Settings Page; Table 22 Administrative Settings, Section Descriptions; Table 23 Administrative Settings, Button Functions

Insight FD Mini C-Arm Imaging System User Guide
Configuring the Application
37 MAN-09971 Revision 001
Administrative Settings Page
Available from System Configuration menu on the Main Screen.
Table 22 Administrative Settings, Section Descriptions
Section/Field Description
Log Files Selection list of all log files.
Set Level of
Detail
Administrators can set System Error log level of detail to Error
Only or Error and Operations.
Audit Mode Administrators can set on or off.
Enable Touch
Screen
Administrators can enable or disable.
Automatic Image
Deletion
Check Delete at the following limits to:
Establish the number of images at which a deletion prompt is
displayed and the number of images to be deleted
and
Establish the number of cine minutes at which a deletion prompt is
displayed and the number of cine minutes to be deleted.
Prior to deletion, the system displays the number of studies
required to achieve the desired number of image, or cine minute,
deletions.
Last System
Backup
Displays date of last system configuration and calibration backup.
Display warning if last backup is older than __ days - When
checked, upon starting the application the system will display a
warning message when the last backup is older than the given
number of days.
System
Shutdown
Administrators can check or uncheck.
When checked, the full system shuts down (default setting).
When unchecked, only the Fluoroscan application shuts down.
Table 23 Administrative Settings, Button Functions
Button Function
Configure Displays Level of Detail section.
Accept Change Changes detail level for System Error log to that selected by Error
Only or Error and Operations button. Hides the Set Level of Detail
section.