Insight FD Mini C-Arm Imaging System User Guide
System Maintenance
69 MAN-09971 Revision 001
Cleaning
Exterior surfaces of the Fluoroscan Insight Imaging System should be
cleaned once a week and anytime after a surface has become soiled. Clean
exterior surfaces of the cabinet, the flex-arm and the C-arm with a soft
cloth or disposable lint-free tissue moistened with water, isopropanol or
methanol. Disinfect using a 10% bleach solution. Wipe surfaces, do not
scrub.
A commercial glass cleaner may be used to clean the monitor’s touch
screen.
Preventative Maintenance
Hologic recommends that preventative maintenance be performed by
authorized service personnel at least once per year.
To Next Page
Loading...
